PARKING BRAKE – ADJUST BRAKE HOSES & LINES – INSPECT – w/o (EVIC) MANUAL TRANSMISSION FLUID LEVEL – INSPECT – w/o (EVIC) PCV VALVE – INSPECT – [Replace if necessary.] TRANSFER CASE FLUID – INSPECT – [Add fluid if necessary.] AIR CLEANER/ELEMENT – REPLACE ENGINE OIL – REPLACE – w/o (EVIC) – [Change the oil more often if the vehicle has been driven off-road for an extended period of time. Under no circumstances should oil change intervals exceed 6000 miles (10000 km) or 6 months whichever comes first.] ENGINE OIL FILTER – REPLACE TRANSMISSION FLUID – REPLACE TIRES – ROTATE SPARK PLUGS – REPLACE
FRANK S. gave our service a 5 star review on 7/6/2023
anual service, includes, regular service,BRAKE INSPECTION ,tire rotation Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels FRONT BRAKES %_______ REAR BRAKES%_______
Remove wheels from vehicle. Inspect brakes. Computer spin balance. Reinstall wheels to vehicle and torque lug nuts to manufacturer's specifications.
Place vehicle on alignment rack, attach equipment, measure caster, camber and toe. Compare to vehicle specifications. Set and adjust all approved alignment angles with allowable specifications.
GREG C. gave our service a 5 star review on 7/5/2023
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – One Side – [NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
(Combination) – AXLE SHAFT – Replace Each Side
ELLIOT B. gave our service a 5 star review on 5/10/2023
anual service, includes, regular service,BRAKE INSPECTION ,tire rotation Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels FRONT BRAKES %__75_____ REAR BRAKES%___80____
Remove wheels from vehicle. Inspect brakes. Computer spin balance. Reinstall wheels to vehicle and torque lug nuts to manufacturer's specifications.
Place vehicle on alignment rack, attach equipment, measure caster, camber and toe. Compare to vehicle specifications. Set and adjust all approved alignment angles with allowable specifications.
elsa c. gave our service a 5 star review on 2/13/2023
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures.
Remove and reinstall four wheels and rear brake drums to inspect brake condition. Inspect entire system for leaks. Lining remaining is: Front ( 90 %) Rear ( 95 %)
William N. gave our service a 5 star review on 1/26/2023